Looking to pitch your sauna floor and install a drain? Consider the from www.saunatimes.com
Introduction
If you're planning to build a sauna in your home, one of the most important things to consider is the flooring. The floor of a sauna needs to be properly sloped to ensure that water drains away from the sauna heater and into a drain. In this article, we'll cover the steps you need to take to slope a sauna floor.
Step 1: Choose the Right Materials
The first step in sloping a sauna floor is to choose the right materials. You'll need to use materials that are suitable for use in a high-temperature, high-humidity environment. We recommend using cement board or tile backer board for the base layer of the floor.
Tip:
Avoid using wood for the base layer, as it can warp and rot over time.
Step 2: Plan the Slope
Once you have your materials, you'll need to plan the slope of the floor. The slope should be at least 1/4 inch per foot, with the highest point of the floor near the sauna heater. This will ensure that water drains away from the heater and into a drain.
Tip:
Use a level to ensure that the slope is even across the entire floor.
Step 3: Install the Base Layer
Next, you'll need to install the base layer of the floor. If you're using cement board or tile backer board, cut it to size and attach it to the subfloor using screws or nails. Be sure to leave a small gap between the boards to allow for expansion.
Tip:
Use a waterproof membrane over the base layer to prevent moisture from seeping through.
Step 4: Install the Sloping Layer
Once the base layer is in place, you'll need to install the sloping layer. This layer should be made of a material that can be shaped to create the slope. We recommend using a cement or mortar mixture for this layer.
Tip:
Apply the sloping layer in thin layers, allowing each layer to dry before applying the next.
Step 5: Install the Final Layer
Finally, you'll need to install the final layer of the floor. This layer should be made of a material that is suitable for use in a sauna environment. We recommend using ceramic or stone tiles for this layer.
Tip:
Use a waterproof grout to fill in the gaps between the tiles.
Conclusion
Sloping a sauna floor is an important step in building a sauna in your home. By following these steps and using the right materials, you can ensure that your sauna floor is properly sloped and will drain water away from the sauna heater.
No comments: